Skip to content
Empty basement room with bare concrete walls and floor

Basement Waterproofing

A dry basement, even when the ground outside is wet.

5.0 on Google · 24 reviews

WHAT IT IS

What Is Basement Waterproofing?

A basement sits below ground level, so wet soil and ground water press against its walls and floor, most of all in the monsoon. Water finds its way in through cracks, construction joints, tie-rod holes and pipe openings, leaving damp walls, puddles on the floor, rusting steel and a musty smell.

For existing basements we work from the inside: active leaks are plugged, cracks and joints are sealed, pipe entries and tie-rod holes are closed, and waterproofing coats designed to resist water pressure are applied to the walls and floor. On new construction, the best protection goes on from the outside before backfilling.

SIGNS TO WATCH FOR

Signs You Need It

  • Damp walls and floor

    Walls and floor that stay damp, especially after rain.

  • Water at the wall base

    Water collecting where the walls meet the floor.

  • Seepage through joints and holes

    Water coming through construction joints or tie-rod holes.

  • White salty marks

    Efflorescence on walls as water dries out.

  • Rusting steel

    Rust stains or corroding reinforcement on walls and slab.

  • Musty smell

    A constant damp smell in the basement or parking.

OUR PROCESS

How We Do It

  1. Inspection

    We inspect the basement, ideally during or soon after rain, and map every point where water is entering.

  2. Surface preparation

    Paint and loose material are removed, and cracks and joints are opened up for treatment.

  3. Plugging leaks and sealing joints

    Active leaks are plugged, and cracks, joints, tie-rod holes and pipe entries are sealed.

  4. Waterproofing coats

    Waterproofing coats designed for below-ground walls are applied to the walls and floor.

  5. Final check

    We check the basement for fresh seepage before handing over, and share photos of the work.

WHY PATOLE ENTERPRISES

What You Can Expect

  • Finds the Real CauseLeaks traced to the source before any work starts
  • Skilled, Polite TeamOn time, tidy, and easy to talk to
  • Fair, Clear CostsCosts explained up front, no surprises
  • Photos & Follow-UpBefore-and-after photos and a post-job check

QUESTIONS

Basement: FAQ

Yes. For existing buildings, inside treatment is the practical route: leaks are plugged, joints sealed and pressure-resistant coats applied. Outside protection is best done during construction.

Active leaks can be plugged during the rains, which is also when they are easiest to find. Coating work needs a dry enough surface, so we plan it around the conditions.

Not necessarily. If the problem is a single joint or crack, it can be treated on its own. We look at the whole basement first and recommend only what is needed.

Get Basement Waterproofing Done Right

Tell us what you are seeing. We will inspect the site, find the real cause and give you a clear quote before any work starts.

Open 7 days · 8:30 AM – 8:30 PM

Call Now