Swimming Pool Waterproofing
Stop losing water you have paid to fill.
5.0 on Google · 24 reviews
WHAT IT IS
What Is Swimming Pool Waterproofing?
A pool holds tonnes of water against its shell all year round. When it leaks, the water can escape through cracks in the shell, construction joints, pipe and light fittings or failed tile grout, and it often turns up as damp in the rooms, parking or basement next to the pool.
For a new pool, the waterproofing goes on before the tiles, and the shell is filled and tested first. For an existing pool, we find the leak, drain the pool, repair the shell and joints, seal every fitting, apply the waterproofing system and retile where needed, then fill and watch the level.
SIGNS TO WATCH FOR
Signs You Need It
Level drops too fast
The water level falls faster than normal evaporation.
Damp walls near the pool
Damp or leaking ceilings and walls in rooms or parking beside the pool.
Loose or hollow tiles
Tiles lifting, cracked or sounding hollow underwater.
Cracks in the shell
Visible cracks in the pool walls or floor.
Wet ground around the pool
Soil or paving that stays wet around the pool edge.
Constant top-ups
Having to add water every few days to keep the level.
OUR PROCESS
How We Do It
Leak check
We compare the pool's water loss with normal evaporation and check fittings, joints and the surroundings to narrow down the leak.
Draining and preparation
The pool is drained, damaged tiles are removed where needed and the surface is cleaned back to sound concrete.
Joints and fittings
Cracks and construction joints are repaired, and every inlet, outlet and light fitting is sealed.
Waterproofing system
The waterproofing coats go over the shell in the required layers and are allowed to cure.
Retiling, refill and monitoring
Tiles go back, the pool is filled, and we watch the level to confirm the leak has stopped.
WHY PATOLE ENTERPRISES
What You Can Expect
- Finds the Real CauseLeaks traced to the source before any work starts
- Skilled, Polite TeamOn time, tidy, and easy to talk to
- Fair, Clear CostsCosts explained up front, no surprises
- Photos & Follow-UpBefore-and-after photos and a post-job check
QUESTIONS
Swimming Pool: FAQ
A simple bucket test helps: put a bucket of pool water on the pool step, mark both levels and compare after a day. If the pool drops noticeably more than the bucket, you likely have a leak. We confirm it on site.
Before tiling. The shell should be waterproofed and then filled and tested for leaks before the tiles go on, because finding a leak under finished tiles is much harder.
For treating the shell, yes. Some fitting leaks can be dealt with more simply. We tell you what your pool needs after the leak check.
Get Swimming Pool Waterproofing Done Right
Tell us what you are seeing. We will inspect the site, find the real cause and give you a clear quote before any work starts.
